1 micron particle removal - 0.1 PPM oil carry over
The inner stainless steel support is anti-corrosive, so no rust will get in the lines
Deep bed borosilicate glass microfiber multi-wrap within the filter element prevents high pressure drop and allows for high oil removal efficiencies
Pressure drop - clean and dry 1.0 PSI
Pressure drop saturated 2.0 PSI exterior allows a unique coalescing action to quickly drain oil
The polyester needle felt sleeve on the element exterior allows a unique coalescing action to quickly drain oil
Differential pressure gauge for easy read when to change the internal filtration element
Only a 4-7 clearance is required for element removal
WARNING: CONTAINS LEAD. May be harmful if eaten or chewed. May generate dust containing lead. Wash hands after use. Keep out of reach of children.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.